Combination
A-Scan/Pachymeter with graphic display and IOL power calculation
software. All A-scans and A-Scan/Pachymeter combination units include
firmware module with SRKII, SRKT, Holladay Dioptimum and Binkhorst II
formulas. Audible tones increase in frequency the closer you get to
visual axis. Constant tone when alignment is achieved with corneal
indentation. Triple tone when measurement is obtained without corneal
indentation.
All Model DGH 5000e and DGH 5100e are equipped
with corneal compression detection software, and are upgradeable to the
water immersion option.
Live waveform display |
Same A-SCAN features as DGH 5000e plus a full capability pachymeter |
Uses same proven corneal thickness measurement algorithm as all DGH pachymeter models |
Automatic measurements - no foot switch required |
Permanently stores up to nine customized maps |
Stores up to 33 measurements by cornea location |
Stores up to 33 measurements by cornea location |
Actual, biased, and ring measurement data |
Solid probe, focused to 1.5mm tip |
Choice of straight or 45 degree angled probe |
Flap measurement option |
Product Specifications:
VOLTAGE: 90-132 VAC or 180-264 VAC
CURRENT DRAW: 0.3 A (typical) @ 115 VAC Line
FREQUENCY: 50/60 HZ INSTRUMENT ACCURACY± 0. 1 mm (Biometer) ± 0.005mm (Pachymeter)
RESOLUTION: 0.01mm (Biometer) 0.00 1 mm (Pachymeter)
A-SCAN GAIN CONTROL: Computer-adjusted automatic with manual override.
BIOMETRY RANGES: Axial Length: 15mm to 35mm Lens Thickness: 2.Omm to 7.5mm AC Depth: 2.Omm to 6.Omm
PACHYMETER CORNEAL THICKNESS RANGE: Standard: O.2mm to I. I mm
FLAP option: 0.095mm to I. I mm
EXTENDED OPTION: O.2mm to 2.Omm
|